• Maximum Working Pressure: 150 PSI
• Working Temperature: 0 to 60 °C
• NPT Thread / Series 40: Tubing diameter in inches (imperial system)
• Release Collar Colors
White: inch size diameter
Black: mm size diameter
• Tube D.E. : 1/4 po
• Thread : 1/8 NPT
Material(s):
• Body: Polymer (PBT)
• Release Collar: Polyacetal resin
• Threaded Body: Nickel-plated brass
• Lock Claw: Stainless steel
• O-Ring: Nitrile rubber
• Needle: Nickel-plated brass
• Lock Nut: Aluminum
• Elastic Sleeve: Nitrile rubber
• Adjusting Screw: Nickel-plated brass
• Quick Connect Design: One-piece fitting saves over 75 % of assembly time compared to standard compression fittings
• Compact design: Allows fittings to be closely mounted
• Optimum flow: No part of the fitting goes inside the tubing for maximum unrestricted airflow
• Instantaneous Connection/Disconnection: Wide release collar allows fast and trouble-free tubing removal
• Fully Reusable: Designed to resist multiple connections and disconnections with leak-free operations and solid tubing gripping
• Tubing size identification: Tubing diameter indicated on release collar
• Corrosion resistant threaded fittings: All threaded fittings are made of nickel-plated brass resistant to corrosion
• POSITIVE GRIPPING ACTION:
Stainless steel lock claws hold the tubing securely without damaging its surface
Vibration and pressure surges are safely absorbed to prevent accidental disconnections
• PERFECT SEAL:
A nitrile rubber elastic sleeve guarantees a perfect seal between standard O.D. tubing and the body of the fitting
• READY-TO-USE THREADS
Male threads have a pre-applied sealant which allows the fitting to be reused up to five times without the need for additional sealants
• SWIVEL:
Swivel elbows and tees can be oriented after installation for a perfect alignment with the tubing
• ROTARY SWIVEL:
The rotary swivel elbow will allow a rotative movement of 500 RPM
• Tubing should be cut clean and straight for a leak-free connection to push-in fittings
• Compressed air
• Vacuum
• Maximum Working Pressure: 150 PSI
• Working Temperature: 0 to 60 °C
• NPT Thread / Series 40: Tubing diameter in inches (imperial system)
• Release Collar Colors
White: inch size diameter
Black: mm size diameter
• Tube D.E. : 1/4 po
• Thread : 1/8 NPT
Material(s):
• Body: Polymer (PBT)
• Release Collar: Polyacetal resin
• Threaded Body: Nickel-plated brass
• Lock Claw: Stainless steel
• O-Ring: Nitrile rubber
• Needle: Nickel-plated brass
• Lock Nut: Aluminum
• Elastic Sleeve: Nitrile rubber
• Adjusting Screw: Nickel-plated brass
• Quick Connect Design: One-piece fitting saves over 75 % of assembly time compared to standard compression fittings
• Compact design: Allows fittings to be closely mounted
• Optimum flow: No part of the fitting goes inside the tubing for maximum unrestricted airflow
• Instantaneous Connection/Disconnection: Wide release collar allows fast and trouble-free tubing removal
• Fully Reusable: Designed to resist multiple connections and disconnections with leak-free operations and solid tubing gripping
• Tubing size identification: Tubing diameter indicated on release collar
• Corrosion resistant threaded fittings: All threaded fittings are made of nickel-plated brass resistant to corrosion
• POSITIVE GRIPPING ACTION:
Stainless steel lock claws hold the tubing securely without damaging its surface
Vibration and pressure surges are safely absorbed to prevent accidental disconnections
• PERFECT SEAL:
A nitrile rubber elastic sleeve guarantees a perfect seal between standard O.D. tubing and the body of the fitting
• READY-TO-USE THREADS
Male threads have a pre-applied sealant which allows the fitting to be reused up to five times without the need for additional sealants
• SWIVEL:
Swivel elbows and tees can be oriented after installation for a perfect alignment with the tubing
• ROTARY SWIVEL:
The rotary swivel elbow will allow a rotative movement of 500 RPM
• Tubing should be cut clean and straight for a leak-free connection to push-in fittings
• Compressed air
• Vacuum
