• Inlet: 1/2 (F) NPT
• Outlet: 1/4 (F) NPT
• Supply Pressure: 30 to 250 PSI
• Maximum Working Temperature: 52 °C
• Bowl Capacity: 240 ml
• Height : 199 mm
• Depth: 103 mm
Material(s):
• Body and Bowl: Zinc
• Seals: Nitrile rubber
• Drain: Brass
• Automatically expels condensed moisture and compressor carry-over liquids from compressed air systems, wherever liquids tend to accumulate
• Large-capacity drain designed with a unique self-cleaning system to insure high operating reliability with a minimum of maintenance
• Reliable and accurate draining of high viscosity fluids
• High resistance to rust and dirt
• External automatic drain
• Energy saver – no electricity required
• Large discharge port prevents clogging
• Metal bowl with sight glass
• Discharge port is threaded 1/4 (F) NPT for condensate removal
• Push-button for manual drain
• Threaded bowl for easy removal
INSTALLATION TIP
It is strongly recommended to always install a “ Y ? strainer (59.705) ahead of an external drain. By trapping large debris and sludge, this will prevent costly malfunctions and extend the life of the automatic drain.
• Can be used where liquids tend to accumulate on a compressed air line system such as a drop leg
• Inlet: 1/2 (F) NPT
• Outlet: 1/4 (F) NPT
• Supply Pressure: 30 to 250 PSI
• Maximum Working Temperature: 52 °C
• Bowl Capacity: 240 ml
• Height : 199 mm
• Depth: 103 mm
Material(s):
• Body and Bowl: Zinc
• Seals: Nitrile rubber
• Drain: Brass
• Automatically expels condensed moisture and compressor carry-over liquids from compressed air systems, wherever liquids tend to accumulate
• Large-capacity drain designed with a unique self-cleaning system to insure high operating reliability with a minimum of maintenance
• Reliable and accurate draining of high viscosity fluids
• High resistance to rust and dirt
• External automatic drain
• Energy saver – no electricity required
• Large discharge port prevents clogging
• Metal bowl with sight glass
• Discharge port is threaded 1/4 (F) NPT for condensate removal
• Push-button for manual drain
• Threaded bowl for easy removal
INSTALLATION TIP
It is strongly recommended to always install a “ Y ? strainer (59.705) ahead of an external drain. By trapping large debris and sludge, this will prevent costly malfunctions and extend the life of the automatic drain.
• Can be used where liquids tend to accumulate on a compressed air line system such as a drop leg