• Port: 2 (F) NPT
• Airflow: 450 SCFM
• Dimensions: Width 146 Mm, Indicator's height 70 mm, Height 482 mm
• Maximum Working Pressure: 232 PSI
• Working Temperature: 1 to 100 °C
• CRN available
Material(s):
• Housing: Aluminum die cast
• Four grades of filtration available
• Reliable and efficient removal of liquid and solid contaminants
• Large condensate reservoir for bulk oil collection
• Advanced airflow design for optimum performance and reducing pressure drops
• External powder coated surface for enhanced abrasion and corrosion resistance
• Compact, modular design for quick and easy installation
• No tie-rod insert minimizing maintenance
• Automatic drain with manual override for testing and depressurization
FILTRATION
Grade M01
• High efficiency oil removal and dust filtration
• Particle removal down to 0.01 micron, including water and oil aerosols
• Maximum remaining oil aerosol down to 0.01mg/m3 to 20°C
• TOPRING offers a complete range of filters and filter elements for higher filtration performance. Oils, water vapors and solid particles must be properly removed from the air of the compressed air system. Clean, dry, oil-free compressed air is essential to optimize compressor filtration, reduce pressure losses, increase efficiency levels and reduce energy costs.
INSTALLATION TIP
The direction of the airflow is marked with an arrow on the surface of the differential pressure indicator (1), the pop-up indicator (2), or the filter (3).
For the proper functioning of the filter, it is essential to comply with this installation tip.
• Food and beverage, chemical, laboratory, and medical
• Suitable for use with all compressor oils including mineral and synthetic oil
• Port: 2 (F) NPT
• Airflow: 450 SCFM
• Dimensions: Width 146 Mm, Indicator's height 70 mm, Height 482 mm
• Maximum Working Pressure: 232 PSI
• Working Temperature: 1 to 100 °C
• CRN available
Material(s):
• Housing: Aluminum die cast
• Four grades of filtration available
• Reliable and efficient removal of liquid and solid contaminants
• Large condensate reservoir for bulk oil collection
• Advanced airflow design for optimum performance and reducing pressure drops
• External powder coated surface for enhanced abrasion and corrosion resistance
• Compact, modular design for quick and easy installation
• No tie-rod insert minimizing maintenance
• Automatic drain with manual override for testing and depressurization
FILTRATION
Grade M01
• High efficiency oil removal and dust filtration
• Particle removal down to 0.01 micron, including water and oil aerosols
• Maximum remaining oil aerosol down to 0.01mg/m3 to 20°C
• TOPRING offers a complete range of filters and filter elements for higher filtration performance. Oils, water vapors and solid particles must be properly removed from the air of the compressed air system. Clean, dry, oil-free compressed air is essential to optimize compressor filtration, reduce pressure losses, increase efficiency levels and reduce energy costs.
INSTALLATION TIP
The direction of the airflow is marked with an arrow on the surface of the differential pressure indicator (1), the pop-up indicator (2), or the filter (3).
For the proper functioning of the filter, it is essential to comply with this installation tip.
• Food and beverage, chemical, laboratory, and medical
• Suitable for use with all compressor oils including mineral and synthetic oil