• Replacement hose 2 m (78 in) (air chuck not included)
• Maximum inlet pressure: 350 PSI
• Working Temperature: 0 to 40 °C
• Air Inlet: 1/4 (M) NPT
• Designed for exact pressure inflation on North-American and imported vehicles equipped with TPMS pressure sensors and other types of vehicles
• Large 90 mm dial gauge for extremely accurate pressure reading from 0 to 90 PSI (0-6 bar) / 1 PSI resolution
• Gauge protected from high pressure (max 350 PSI)
• 45° angle swivel gauge with rubber protector for increased durability
• Rugged hanging steel ring
• Heavy duty pistol grip (zinc/brass alloy)
• 3 functions: inflation, deflation and tire pressure measurement
• Nitrogen compatible
TOPRING COMPATIBLE AIR CHUCKS:
63.100 : Automatic lock-on
63.203 : Straight clip-on
63.210 : Ball foot clip-on
63.240 : Dual foot
63.245 : Dual foot lock-on
63.250 : Extended tilt lock dual foot
63.625C : Large bore extended dual foot
• For safety reasons and to reduce tire wear as well as fuel consumption, it is recommended to check the tire pressure once a month and before any long distance drive
• The pressure should be checked when the tires are cold (vehicle has been stationary for at least three hours or after driving less than 2 km)
• Replaceable 2 m flexible hose allows the use of the gauge from a safe distance from the tire during inflation in a cage (required by safety agencies)
• Cars, light and heavy trucks, motorcycles, bicycles, racing vehicles
• Replacement hose 2 m (78 in) (air chuck not included)
• Maximum inlet pressure: 350 PSI
• Working Temperature: 0 to 40 °C
• Air Inlet: 1/4 (M) NPT
• Designed for exact pressure inflation on North-American and imported vehicles equipped with TPMS pressure sensors and other types of vehicles
• Large 90 mm dial gauge for extremely accurate pressure reading from 0 to 90 PSI (0-6 bar) / 1 PSI resolution
• Gauge protected from high pressure (max 350 PSI)
• 45° angle swivel gauge with rubber protector for increased durability
• Rugged hanging steel ring
• Heavy duty pistol grip (zinc/brass alloy)
• 3 functions: inflation, deflation and tire pressure measurement
• Nitrogen compatible
TOPRING COMPATIBLE AIR CHUCKS:
63.100 : Automatic lock-on
63.203 : Straight clip-on
63.210 : Ball foot clip-on
63.240 : Dual foot
63.245 : Dual foot lock-on
63.250 : Extended tilt lock dual foot
63.625C : Large bore extended dual foot
• For safety reasons and to reduce tire wear as well as fuel consumption, it is recommended to check the tire pressure once a month and before any long distance drive
• The pressure should be checked when the tires are cold (vehicle has been stationary for at least three hours or after driving less than 2 km)
• Replaceable 2 m flexible hose allows the use of the gauge from a safe distance from the tire during inflation in a cage (required by safety agencies)
• Cars, light and heavy trucks, motorcycles, bicycles, racing vehicles