• Effective Length: 24 in
• Effective Length: 60 m
• Maximum Working Pressure: 250 PSI
• Output at 80 PSI: 2400 SCFM
• Input at 80 PSI: 96 SCFM
• Amplification Ratio: 25: 1
Material(s):
• Aluminum
• Amplify compressed airflow up to 25 times
• Provide wide-area coverage with a thin sheet of air
• Uniform curtain of air
• Low operating costs
• Quiet, up to 50 decibels noise reduction over open air tubes
• No maintenance, no moving parts
• No electricity or explosion hazard
• Compact, easy to install
• Instant ON/OFF
HOW IT WORKS: MORE PERFORMANCE WITH LESS NOISE
Air knives release a tiny amount of compressed air at high speed through a .003 in slot along their entire length
This high-speed sheet of air entrains a large volume of surrounding air, effectively amplifying compressed airflow 25 times
INSTALLATION TIP
A 5 micron filter and pressure regulator are recommended for most applications
• Air knives over 18 in should be supplied with air from both sides
• Removing water from plastic sheets or metal
• Blowing off chips, debris, dirt
• Parts cleaning before painting
• Cooling extruded parts
• Cleaning/cooling of metal or plastic strips
• Cleaning/cooling of parts on a conveyor
• Effective Length: 24 in
• Effective Length: 60 m
• Maximum Working Pressure: 250 PSI
• Output at 80 PSI: 2400 SCFM
• Input at 80 PSI: 96 SCFM
• Amplification Ratio: 25: 1
Material(s):
• Aluminum
• Amplify compressed airflow up to 25 times
• Provide wide-area coverage with a thin sheet of air
• Uniform curtain of air
• Low operating costs
• Quiet, up to 50 decibels noise reduction over open air tubes
• No maintenance, no moving parts
• No electricity or explosion hazard
• Compact, easy to install
• Instant ON/OFF
HOW IT WORKS: MORE PERFORMANCE WITH LESS NOISE
Air knives release a tiny amount of compressed air at high speed through a .003 in slot along their entire length
This high-speed sheet of air entrains a large volume of surrounding air, effectively amplifying compressed airflow 25 times
INSTALLATION TIP
A 5 micron filter and pressure regulator are recommended for most applications
• Air knives over 18 in should be supplied with air from both sides
• Removing water from plastic sheets or metal
• Blowing off chips, debris, dirt
• Parts cleaning before painting
• Cooling extruded parts
• Cleaning/cooling of metal or plastic strips
• Cleaning/cooling of parts on a conveyor