• Maximum Working Pressure: 300 PSI
• Working Temperature: 4 to 79 °C
• Thread: 1/2 (F) NPT
• Exhaust thread: 3/4 (F) NPT
• Inlet/Outlet Flow: 161 SCFM
• Exhaust Flow: 91 SCFM
• Locking Hole: 8.8 mm
Material(s):
• Body: Cast Aluminum alloy
• Handle: Plastic
• Spool: Aluminum
• Seals: Nitrile rubber
• Spring: Stainless steel
• The high flow safety lockout valve is a 2-position, 3-way valve that exhausts downstream air when shifted to the closed position
• Colored bright yellow with a red handle, it is easy to distinguish from other air preparation components
• A standard padlock can be inserted in the hole of the plunger to lock the unit in a non-flowing position, keeping it safe for downstream maintenance
• Meets OSHA Standard 29 CFR Part 1910.147
• High flow exhaust port
• Yellow cast Aluminum body with red handle (NACE MR0175 / ISO 15156) for high visibility
• Muffler included
HOW IT WORKS
Normal operation – valve open:
With the handle pulled upward: Inlet port 1 is open to outlet port 2 and exhaust port 3 is blocked
lockout operation – valve closed:
With the handle pulled inward: Inlet port 1 is blocked and outlet port 2 is open to exhaust port 3
TECH TIP
Prior to servicing, the red handle is pressed inward, blocking pressure and relieving all downstream air pressure
A padlock is installed through the locking hasp, preventing accidental actuation during the maintenance procedure
Following maintenance, the padlock is removed and the red handle is pulled outward, returning air pressure to the system
• In accordance with OSHA Standards, lockout valves are used during maintenance and service procedures of air operated equipment (5 microns). lockout ball valves are installed in pneumatic drop legs or individual pneumatic control lines.
• Maximum Working Pressure: 300 PSI
• Working Temperature: 4 to 79 °C
• Thread: 1/2 (F) NPT
• Exhaust thread: 3/4 (F) NPT
• Inlet/Outlet Flow: 161 SCFM
• Exhaust Flow: 91 SCFM
• Locking Hole: 8.8 mm
Material(s):
• Body: Cast Aluminum alloy
• Handle: Plastic
• Spool: Aluminum
• Seals: Nitrile rubber
• Spring: Stainless steel
• The high flow safety lockout valve is a 2-position, 3-way valve that exhausts downstream air when shifted to the closed position
• Colored bright yellow with a red handle, it is easy to distinguish from other air preparation components
• A standard padlock can be inserted in the hole of the plunger to lock the unit in a non-flowing position, keeping it safe for downstream maintenance
• Meets OSHA Standard 29 CFR Part 1910.147
• High flow exhaust port
• Yellow cast Aluminum body with red handle (NACE MR0175 / ISO 15156) for high visibility
• Muffler included
HOW IT WORKS
Normal operation – valve open:
With the handle pulled upward: Inlet port 1 is open to outlet port 2 and exhaust port 3 is blocked
lockout operation – valve closed:
With the handle pulled inward: Inlet port 1 is blocked and outlet port 2 is open to exhaust port 3
TECH TIP
Prior to servicing, the red handle is pressed inward, blocking pressure and relieving all downstream air pressure
A padlock is installed through the locking hasp, preventing accidental actuation during the maintenance procedure
Following maintenance, the padlock is removed and the red handle is pulled outward, returning air pressure to the system
• In accordance with OSHA Standards, lockout valves are used during maintenance and service procedures of air operated equipment (5 microns). lockout ball valves are installed in pneumatic drop legs or individual pneumatic control lines.