• Thread: 3/8 (F) NPT
• Maximum Working Pressure: 360 PSI
• Maximum Connection/Disconnection Pressure: 217 PSI
• Working Temperature: -20 to 100 °C
• Airflow: 75 SCFM at 100 PSI inlet with 10 PSI pressure drop
Material(s):
• Black part: Steel
• Sleeve: Zinc diecast, nickel plated
• Housing: Steel nickel plated
• Cylinder: Surface hardened steel, nickel plated
• Other coupler components: Rubber coating
• Valve Spring: Stainless steel
• Seal: Nitrile rubber
• Accept 3/8 INDUSTRIAL interchange plugs (A-A59439)
• Prevent dangerous hose whip through a two-step disconnection
• Meets ISO 4414 safety standards
• Full-flow: tools work at maximal performance without having to increase the supply pressure
• Zero load pressure
- Effortless connection because there is no pressure resistance
- Safe disconnection because downstream pressure is automatically vented
• Low disconnection noise reduces workplace noise pollution
• Tenifer treated for better abrasion resistance
SAFETY SOLUTION WITH A TWO-STEP DISCONNECTION
1. CONNECTION:
Push compatible plug into coupling and swing approximately 90° until the orange ring engages in the groove
2. DISCONNECTION:
Pull back orange ring and swing plug to stop
In order to prevent the hose from ejecting dangerously, the plug must be held in the hand until the hose is completely ventilated
• Assembly lines and air tools, and where hose whip and accidental disconnections must be avoided
• Thread: 3/8 (F) NPT
• Maximum Working Pressure: 360 PSI
• Maximum Connection/Disconnection Pressure: 217 PSI
• Working Temperature: -20 to 100 °C
• Airflow: 75 SCFM at 100 PSI inlet with 10 PSI pressure drop
Material(s):
• Black part: Steel
• Sleeve: Zinc diecast, nickel plated
• Housing: Steel nickel plated
• Cylinder: Surface hardened steel, nickel plated
• Other coupler components: Rubber coating
• Valve Spring: Stainless steel
• Seal: Nitrile rubber
• Accept 3/8 INDUSTRIAL interchange plugs (A-A59439)
• Prevent dangerous hose whip through a two-step disconnection
• Meets ISO 4414 safety standards
• Full-flow: tools work at maximal performance without having to increase the supply pressure
• Zero load pressure
- Effortless connection because there is no pressure resistance
- Safe disconnection because downstream pressure is automatically vented
• Low disconnection noise reduces workplace noise pollution
• Tenifer treated for better abrasion resistance
SAFETY SOLUTION WITH A TWO-STEP DISCONNECTION
1. CONNECTION:
Push compatible plug into coupling and swing approximately 90° until the orange ring engages in the groove
2. DISCONNECTION:
Pull back orange ring and swing plug to stop
In order to prevent the hose from ejecting dangerously, the plug must be held in the hand until the hose is completely ventilated
• Assembly lines and air tools, and where hose whip and accidental disconnections must be avoided