• Port Size: 1/2 (F) NPT
• Maximum Airflow at 100 PSI: 78 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 4 to 52 °C
• Working Pressure: 0-125 PSI
• Filtration: 5 microns
• Drain: Manual drain
• Bowl Capacity: 112.4 ml
• Pressure Gauge Port Size: 1/8 (F) NPT
• Panel Mount Thread: 1-3/16 – 18 UNEF – 2B
• Panel Mount Opening: 1-1/4 in (3.2 cm)
Material(s):
• Body: Zinc
• Spring Cage: Acetal
• Bowl: Polyurethane with guard
• Space-saving integrated filter/regulator design
• High-flow capacity
• Push-pull Adjusting Knob
• Automatic drain available
INSTALLATION TIP
Assembly is simple using Allen key style screws and an O-ring
Units can be quickly and easily assembled and disassembled
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
• Port Size: 1/2 (F) NPT
• Maximum Airflow at 100 PSI: 78 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 4 to 52 °C
• Working Pressure: 0-125 PSI
• Filtration: 5 microns
• Drain: Manual drain
• Bowl Capacity: 112.4 ml
• Pressure Gauge Port Size: 1/8 (F) NPT
• Panel Mount Thread: 1-3/16 – 18 UNEF – 2B
• Panel Mount Opening: 1-1/4 in (3.2 cm)
Material(s):
• Body: Zinc
• Spring Cage: Acetal
• Bowl: Polyurethane with guard
• Space-saving integrated filter/regulator design
• High-flow capacity
• Push-pull Adjusting Knob
• Automatic drain available
INSTALLATION TIP
Assembly is simple using Allen key style screws and an O-ring
Units can be quickly and easily assembled and disassembled
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application