• Port Size: 1/4 (F) NPT
• Maximum Airflow at 100 PSI: 31 SCFM
• Maximum Working Pressure: 175 PSI
• Working Temperature: 4 to 66 °C
• Filtration: 5 microns
• Drain: Internal automatic drain
• Bowl Capacity: 44.4 ml
Material(s):
• Bowl: Polyurethane
• Body: Zinc
• Compact size
• High-flow capacity
• Removes water through centrifugal force
• Removes contaminants down to 5 microns in size
• Automatic drain available
INSTALLATION TIP
Assembly is simple using Allen key style screws and an O-ring
Units can be quickly and easily assembled and disassembled
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
• Port Size: 1/4 (F) NPT
• Maximum Airflow at 100 PSI: 31 SCFM
• Maximum Working Pressure: 175 PSI
• Working Temperature: 4 to 66 °C
• Filtration: 5 microns
• Drain: Internal automatic drain
• Bowl Capacity: 44.4 ml
Material(s):
• Bowl: Polyurethane
• Body: Zinc
• Compact size
• High-flow capacity
• Removes water through centrifugal force
• Removes contaminants down to 5 microns in size
• Automatic drain available
INSTALLATION TIP
Assembly is simple using Allen key style screws and an O-ring
Units can be quickly and easily assembled and disassembled
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application